The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - price checking a '68 4x4 short box fleet side

hrc200x · 10-15-2013, 11:15 PM

Went and looked at a '68 4x4 1/2 ton short box truck sunday. Its rusty, needs rockers, parts of the floor were gone, cab corners, maybe front fenders were trimmed a bit to clear larger tires, has a flat bed on it now but he has the fleet side box sides for it and they arn't that bad, some through rust areas. the bottom of the floor was totally rusted away. Its a 6 cylinder, 3 on tree. Runs/drives, no power steering or brakes. Only thing that really concerns me is that the back half of the frame seems thinner from the rust, not sure if it sat in tall grass or what. Whats the going rate for something similar?

10-15-2013, 11:15 PM	#1
hrc200x Registered User Join Date: Sep 2002 Location: Minnesota Posts: 203	price checking a '68 4x4 short box fleet side Went and looked at a '68 4x4 1/2 ton short box truck sunday. Its rusty, needs rockers, parts of the floor were gone, cab corners, maybe front fenders were trimmed a bit to clear larger tires, has a flat bed on it now but he has the fleet side box sides for it and they arn't that bad, some through rust areas. the bottom of the floor was totally rusted away. Its a 6 cylinder, 3 on tree. Runs/drives, no power steering or brakes. Only thing that really concerns me is that the back half of the frame seems thinner from the rust, not sure if it sat in tall grass or what. Whats the going rate for something similar? __________________ '75 Chevy 3/4 4x4, 6" suspension lift, 3" body lift, 3" lifted gas tanks, '83 cab, '88 clip, 35" cooper tires, American Racing Baja rims, 350, 700r4, 208. Last edited by hrc200x; 10-15-2013 at 11:34 PM.