The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Dano69c10 · 10-17-2013, 08:48 AM

This is the method I use; I use my 4" cutting wheel and cut into the bolts as such.

If you have a real steady hand, then cut a little more;

The nut will either fall off the bolt, or you can wrench off the bolt easily.

Dano

10-17-2013, 08:48 AM	#5
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: When blowing apart your beds, This is the method I use; I use my 4" cutting wheel and cut into the bolts as such. If you have a real steady hand, then cut a little more; The nut will either fall off the bolt, or you can wrench off the bolt easily. Dano __________________ '69 Fleet It ain't yours, if you didn't build it!