Quote:
Originally Posted by kieth
Why not just add a spacer block to the rear of the crossmember, bolt it between the mounting brackets and the crossmember.....voilla the rear end is spaced back 1-1.5" depending on the thickness of the material one uses.........Kieth
|
Sure 'nuff!!! Much better than what I described. Wondering why I had gone to so much trouble doing mine, I went out to look, and as I was walking up to it, I remembered that I had moved mine FORWARD--about 3 years ago would be my excuse. [But I still peeped underneath to eyeball what u described: all good info! Thanks for the heads-up, Kieth.]
Sam