[hrc200x]

I did one of those headliners this summer in cloth. There are outlines in the plastic backing piece for the sun visor triangle shaped holes and one for the dome light but they have fabric over them incase you don't have visors or a light. I did the dome light first and just cut the fabric in the center in a X shape where the points of the X go out to the corners, that is where I made my first mistake, the hole that comes in the plastic is larger than the dome light, so don't cut all the way to the corners, measure first and cut small, same for the visor holes cut as little as possible just enough to get the spring loaded thing through.

I was able to patch my mistake with extra headliner material they wrapped the headliner in, it is noticeable but not bad.

It seems like a good quality piece however not sure how it will hold up. I have only got the top metal trim above the window in and the pillar pieces, haven't done above the door or back window yet.