Hey all;
I continued working on the wiring today, it's slow going.
I installed a weather resistant inline fuse holder for the fan harness and connected it to the junction box and connected the ground to the fender.
I bolted in the relays for the HD headlight harness and connected the ground for the LH side headlight to the core support.
I installed wire wrap on various wires.
For the fender ground connection I used a copper washer to ensure good conductivity and some di-electric grease to ensure the bare metal on the fender doesn't rust.
I just have a few more small things to do in the engine compartment before it's wrapped up, like finishing up wire wrap on various wires, securing the wiring, installing the horn and running the wiring for the horn, turn signals, parking lights and headlights to the fuse box.
