The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

DennisP · 10-29-2013, 02:39 PM

Thank you for the input guy's! The reason I wanted to go with POL is they are only about 3 miles from my home. I purchased the 2.5" drop spindles and dics power brake conversion kit as well as 1" front and 4" rear shorter springs, shocks, and track bar. Only problem I had was the track bar was too short. Took it back and got the correct one. Everything went together well.
I also added new rear drums, brakes,wheel cylinders, and brake spring kits.
I will post before and after pics when I can get out there with my camera.

10-29-2013, 02:39 PM	#15
DennisP Registered User Join Date: Aug 2011 Location: Southern, CA Posts: 141	Re: Disc conversion on C20 Thank you for the input guy's! The reason I wanted to go with POL is they are only about 3 miles from my home. I purchased the 2.5" drop spindles and dics power brake conversion kit as well as 1" front and 4" rear shorter springs, shocks, and track bar. Only problem I had was the track bar was too short. Took it back and got the correct one. Everything went together well. I also added new rear drums, brakes,wheel cylinders, and brake spring kits. I will post before and after pics when I can get out there with my camera. Last edited by DennisP; 10-29-2013 at 02:51 PM.