View Single Post
Old 10-30-2013, 12:37 AM   #11
y5mgisi
Second Chance Program
 
y5mgisi's Avatar
 
Join Date: Jun 2006
Location: Portland, OR
Posts: 2,642
Re: How far off does camber halve to be to cause pull?

Quote:
Originally Posted by BMERDOC View Post
Maybe its your steering box?
Not going to say its not possible, but it just seems strange that I Just have to hold the wheel at about 20* to the left for it to go straight. If i let go of the wheel, the wheel returns to 0* and i start heading right.

Quote:
Originally Posted by Special-Ed View Post
after further review... id take the best tires you have, put them on, take it to a shop have them check the front end and balljoints then have the alignment verified and fixed....

iirc there was also some kind of issue with the geometry of the pitman and idler arms to the center link that created some kind of issues like this...

is it safe to assume you have checked the brakes and the bearing? air pressure?
I will have to do that. I have checked brakes, bearings, and pressure. In fact i have the left side a little lower than the right to help offset the pull.
__________________
90 Chevy Suburban 2500 5.3 swap/th400/np241/14bltSF/10blt.
77 C20 crew cab Silverado. 396/th400. In work.
y5mgisi is offline   Reply With Quote