The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Alex Hayley · 12-11-2003, 03:45 PM

There should be a hole in the back of the tach with an adjustment screw in it. Using an additional tach, you can set the stock tach by turning the screw until the two tachs match.

12-11-2003, 03:45 PM	#11
Alex Hayley Registered User Join Date: Jul 2000 Location: NC Posts: 987	There should be a hole in the back of the tach with an adjustment screw in it. Using an additional tach, you can set the stock tach by turning the screw until the two tachs match.