The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

NEWFISHER · 10-31-2013, 11:46 AM

I welded the 2 nuts onto the tube and re-used the ebrake cradle/bracket. Going from 65 to 74 the lower section was too short so I used some square tube as a slip and welded it together once mounted.

10-31-2013, 11:46 AM	#6
NEWFISHER Registered User Join Date: Sep 2012 Location: Oregon Posts: 3,303	Re: Steering Column Swap? I welded the 2 nuts onto the tube and re-used the ebrake cradle/bracket. Going from 65 to 74 the lower section was too short so I used some square tube as a slip and welded it together once mounted.