View Single Post
Old 10-31-2013, 10:26 PM   #4
SCOTI
Registered User
 
SCOTI's Avatar
 
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,133
Re: Help me figure out what I need please.

Quote:
Originally Posted by jorgensensc View Post
Thanks for the reply! I will look into the rear shock relocation brackets. I have seen them mentioned before. As for the front springs, if I go with lowered 1/2 ton springs then I might as well spend the money for airbags up front, right? Should I go with heavy duty Monroe shocks or just the regular duty? Do you think the heavy duty shocks will make for a stiffer ride, negating the value of the air ride?
Too much pressure will impact ride quality so there is a balance to be found... Monroes are decent shocks. Any of there 'better' quality units should work well. If you have a CarQuest near you, their 'house' brand shocks are re-labled KYB GR-2's which are very decent as well (& offer better ride quality vs their Gas-a-Just series).

Air bags up front will prob offer better ride quality vs a cheap drop spring (cheap = any company that don't/can't tell you what the actual spring rate is). But, bags up front require more expense (compressors, tank, gauges (or sensors).... it escalates so it might be budget driven in most cases.

Again.... I would start w/cutting a coil of the bbc springs & see how it goes. If the stance or ride quality isn't what you want, move forward to the bags.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG

Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....

Cubic inches is like Indiana Jones with a cheap pistol.
SCOTI is offline   Reply With Quote