[ksshane]

Current Height

29 7/8 Front
32 1/2 Rear

Picked up a flip kit from DJM, and 2 1/2 Dropped Spindles from CPP. Planned on cutting a coil and a half out of the stock springs up front.

Installed the flip kit and that dropped the rear down to 27", but Im riding on the frame so Ill be installing a c-notch, and Im guessing it will allow the rear to drop another half an inch or so. Atleast Im hoping it doesnt drop anymore than that.

Tore the front end apart and discovered the front coils had been heated so Im picking up some new 3" dropped coils today. Replaced the ball joints so should just have to bolt it all back together.

Ill measure the front end when its done and post updated photos.