|
Re: 1964 C-10 factory ac
First of all, let me welcome you to the forum. This is a great site, with very friendly members, and tons of info to see. You will like it here.
The '64 A/C was a dealer-only installation. The '65/'66 trucks with A/C were installed on the assembly line. You are very fortunate to have a lot of the very hard to find parts, such as the center dash bezel, the evaporator assembly, and the A/C-specific heater box. Those are not easy to find, and they bring big money.
My '64 is an A/C truck as well. Oddly enough, when I got the truck, all of the inside parts were there, and everything under the hood was gone. It's usually the other way around. I was able to find all of the stuff I needed, and if you look at my build thread, I have steps where I restored the evaporator box, the heater box, and the heater control. It might be helpful to you. Also, I highly suggest getting a factory assembly manual and most importantly, a 1964 Accessories Installation Reference Manual. That does a great job explaining the A/C system and how it's installed, along with the wiring.
|