The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Need to raise front of Yukon XL a few inches

Gigem · 11-08-2013, 10:34 AM

My wife's 2001 Yukon XL 1500 2WD was riding low in the back due to springs that had sagged from a lot of trailering duty.

When I went to the Autozone, I saw that they had Moog "standard duty" replacements and "heavy duty". I got the heavy duty ones, and they have lifted the rear end up higher than the front.

We like the look and the ride, so I am going to keep the HD springs in the back. Question now is, can I swap springs in the front to get it more level?

I haven't gone back to Autozone to see if they list a Moog heavy duty front spring - thought I would ask for opinions here first. Any ideas?

Thanks in advance...

11-08-2013, 10:34 AM	#1
Gigem Registered User Join Date: Feb 2012 Location: Lakeway, TX Posts: 335	Need to raise front of Yukon XL a few inches My wife's 2001 Yukon XL 1500 2WD was riding low in the back due to springs that had sagged from a lot of trailering duty. When I went to the Autozone, I saw that they had Moog "standard duty" replacements and "heavy duty". I got the heavy duty ones, and they have lifted the rear end up higher than the front. We like the look and the ride, so I am going to keep the HD springs in the back. Question now is, can I swap springs in the front to get it more level? I haven't gone back to Autozone to see if they list a Moog heavy duty front spring - thought I would ask for opinions here first. Any ideas? Thanks in advance... __________________ 1972 GMC Sierra Grande (current truck) 1980 Chevy Stepside (gone) 1987 Chevy Blazer (gone) 1972 Chevelle SS Convertible (gone) 1973 Chevy Corvette (gone) 1967 Chevy Camaro (STOLEN!)