The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1960-61 sail panels and back of cab trim removal?

oem4me · 11-08-2013, 10:11 PM

The rear edge of the sail panels are secured by sliding forward slightly into a hidden retainer which is screwed to the side of the cab. This retainer will not be visible until the two exposed screws at the front edge of the panel and one screw at the rear wrap around are removed and the sail trim is pulled outward (only in front) and then pushed rearward, releasing it from the cab. With the trim panel off, the hidden retainer can be removed easily.

11-08-2013, 10:11 PM	#3
oem4me Registered User Join Date: Aug 2010 Location: Burbank CA Posts: 3,055	Re: 1960-61 sail panels and back of cab trim removal? The rear edge of the sail panels are secured by sliding forward slightly into a hidden retainer which is screwed to the side of the cab. This retainer will not be visible until the two exposed screws at the front edge of the panel and one screw at the rear wrap around are removed and the sail trim is pulled outward (only in front) and then pushed rearward, releasing it from the cab. With the trim panel off, the hidden retainer can be removed easily. Last edited by oem4me; 11-09-2013 at 02:10 AM.