[Jabes1]

I'm not sure why the fluid was low and yes its a concern of mine. My brake lines are probably the originals, I do not see any fluid leaks on my cylinders on the rearend or calipers, but its going somewhere obviously. I'm replacing my rubber lines with Stainless lines from Inline Brakelines. There was a slight mess up on their end and they are correcting it. I'm also going to replace the cylinders for good measure, since there is a good chance they are original since I've never changed them and I've had the truck since I was 16. I cannot swap wheels. The tires I have are directional, meaning they only are meant to rotate in one direction. The wheels I have are 20x10's on the rear and 20x8's on the front. There may be a leak on the drivers side caliper, but I cannot tell because it has a film of powersteering fluid on it from the seal on the top of the powersteering box going bad recently. It could be a small pinhole on one of the lines... like I said Im not sure. Im getting the wheels balanced tomorrow.