[FarmerSid]

Number 9, "Otherwise do your home work" is a bit harsh don't ya think? Part of doing "home work" is asking questions. It would be easy to measure a flat out cross member and duplicate it if someone had one to share the dimensions with. I don't know if I'd be so quick to buy from flat out, measure it up and post it all over the net. A lot of work went into what flat out came up with and I can appreciate that. Me, I have the stock C4 cross member with everything on it so I could measure it all up and come up with a cross member design of my own for my own use. I'd have no problem sharing what I come up with as long as it's for your own use and not to make money off of my design. I could only enforce that so much so I would have to be selective in who I share my info with. I've chatted offline with a few members from here and they have been more than helpful and willing to share. That's what it's all about. I have no intentions of cutting into flat outs market. I can't afford what they offer so I have to come up with something on my own and that is what I am going to do. I am not in the stage yet of my build to start making my cross member but when I am, I will post on here how I did it. Maybe a bunch of us will put our heads together and come up with something. Who knows.

Number 9, Since you have built C4 subframes, do you have any info for those that want to build a cross member other than "do your home work"?