|
Re: How To Pull Engine/Trans Together
pretty simple, remove- radiator hoses,fuel line to pump from tank, tranny lines,driveshaft, linkage, exhaust flanges, motor mounts bolts,throttle linkage, elec wires from dizzy, oil gage line, ground cable from battery,
you will have to slide the tranny crossmember back out of the way, i would put a jack under the tranny to keep it stable and have some lower it down as you pull the assembly out and guide it
__________________
Mike
72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider.
421 SBC / TH350 3000RPM Stall
Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks 
|