View Single Post
Old 11-19-2013, 06:23 AM   #6
Sharps40
Account Suspended
 
Join Date: Oct 2012
Location: here
Posts: 2,408
Re: rear motor mounts

Oreilly Auto Parts: Anchor Brand. I used the following part numbers for My 65 I6 and 3 speed.

Anchor 2107 Left and Right Upper rear motor/trans mounts, 2 each at $5.99 per. And, Anchor 2108, Left and Right Lower rear motor/trans mounts, 2 each at $3.99 per. And no freight fees. (I believe the Westar part numbers are EM-2107 and EM-2108 at about the same prices available variously on the innerweb).

http://www.oreillyauto.com/site/c/de...7&keyword=2107

http://www.oreillyauto.com/site/c/de...7&keyword=2108

New front mounts at Oreillies, $6.99 each - Anchor 2282 get two (one for left one for right they are interchangeable though it's labeled on the sight as left side......prolly cause 292 has a different right mount out front and may take a different right front rubber insert but 230/250 are same on both sides......) Made in America. Only $2.99 from Rock Auto but $40eleven to ship and a 27 year wait for delivery...so.....

http://www.oreillyauto.com/site/c/de...d=engine+mount

Enjoy. See the John Lee Jr Thread for install - just search motor mounts once yer in the thread or go direct to post 186 and post 282. It was a wiggle festival getting the rears in and the fronts are gonna require some bench assembly due to hidden bolts as you go. There was a slight difference between new and old on the front ones, but they work fine.

But if the engine/bell housing is out, then it should go much easier for ya.

(The rear mounts won't come up on an Oreillies parts search till ya actually search on the part number....otherwise the orellies data base thinks they don't carry rear motor mounts for these trucks. Just bring em up and either order via mail or make your printable list so the counter geek can scan the bar code and get them in for ya.)

Last edited by Sharps40; 11-19-2013 at 09:11 AM.
Sharps40 is offline   Reply With Quote