The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 11-20-2013, 09:13 PM

The stock hubs stick out with the dust cap on them. The flat center cap want work unless U modify the wheel are the hub. The wheel center hole is smaller on the new wheels as well it would have to be opened up to get a good mount are as stated us some spacers.

I like the polished 20" Tahoe wheels also.

11-20-2013, 09:13 PM	#9
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Stock GM 20s The stock hubs stick out with the dust cap on them. The flat center cap want work unless U modify the wheel are the hub. The wheel center hole is smaller on the new wheels as well it would have to be opened up to get a good mount are as stated us some spacers. I like the polished 20" Tahoe wheels also. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.