The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Rear wheels not centered in fender opening

66farmer · 11-21-2013, 03:27 PM

I see 3 different thinks that caused this problem.

1. I moved the bed forward. To close the gap between bed to cab.
2. I lowered the rear of the truck 6". Which push the axle to the rear.
3. I used EC cross member which maybe is not located in the stock position

As for the wheel base 114 5/8" I'm close. I didn't think I would be 115" because the front end is out of a 1978. And I did lower it 6"

11-21-2013, 03:27 PM	#33
66farmer Registered User Join Date: Jun 2007 Location: North Plains Oregon Posts: 684	Re: Rear wheels not centered in fender opening I see 3 different thinks that caused this problem. 1. I moved the bed forward. To close the gap between bed to cab. 2. I lowered the rear of the truck 6". Which push the axle to the rear. 3. I used EC cross member which maybe is not located in the stock position As for the wheel base 114 5/8" I'm close. I didn't think I would be 115" because the front end is out of a 1978. And I did lower it 6"