The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 67-72 Electric speedo

eagleuh1 · 11-25-2013, 08:32 PM

67C10rustbuket, on you mount bracket, I would recommend you slot the initial three holes you use to mount to gauge console. I missed a step from LS171Nova, where you verify the speedo is centered. Mine came out too far to the right. Unfortunately, I already drilled all the other holes before I checked. Slotting those 3 holes would allow repossissioning the mount before drilling the rest of the mount holes. Otherwise, worked great and definitely glad I went this way. Thanks. Jim
Slot these 3 holes.

11-25-2013, 08:32 PM	#253
eagleuh1 Registered User Join Date: Jul 2009 Location: Russellville, Arkansas Posts: 1,699	Re: 67-72 Electric speedo 67C10rustbuket, on you mount bracket, I would recommend you slot the initial three holes you use to mount to gauge console. I missed a step from LS171Nova, where you verify the speedo is centered. Mine came out too far to the right. Unfortunately, I already drilled all the other holes before I checked. Slotting those 3 holes would allow repossissioning the mount before drilling the rest of the mount holes. Otherwise, worked great and definitely glad I went this way. Thanks. Jim Slot these 3 holes. Attached Images Last edited by eagleuh1; 11-25-2013 at 08:44 PM.