The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Daze57 · 11-26-2013, 11:09 PM

OK good ?s .
dish soap and warm water is best foer the rubber - douse in the water real good and then press in to place ,
use the factory rivits -pop rivits leave too much extra material on them
looking at you stuff you have it all looks good .
you can if you are careful separate the wing window from the frame
if you pull up carefully on the top of the frame you will be able to clear the top pin from the frame .
then add your rubber and put it bk together the same way .

11-26-2013, 11:09 PM	#7
Daze57 Registered User Join Date: Jul 2011 Location: Las Vegas - Nev. aka Sin City Posts: 1,835	Re: wing window rebuild OK good ?s . dish soap and warm water is best foer the rubber - douse in the water real good and then press in to place , use the factory rivits -pop rivits leave too much extra material on them looking at you stuff you have it all looks good . you can if you are careful separate the wing window from the frame if you pull up carefully on the top of the frame you will be able to clear the top pin from the frame . then add your rubber and put it bk together the same way .