The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**LockDoc** · 12-03-2013, 11:00 AM

-
You might try testing the continuity in the light brown wire from the under dash connector to the connector by the drivers side tail light. If your truck has interior panels you will have to remove the rear drivers side one to get to the connector... Also check where the wire loom goes around the emergency brake assembly under the dash. My emergency brake ratchet plate was rubbing on my wiring. (this won't apply if you are talking about the '68)

LockDoc

12-03-2013, 11:00 AM	#3
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 26,078	Re: 68 fuel gauge - You might try testing the continuity in the light brown wire from the under dash connector to the connector by the drivers side tail light. If your truck has interior panels you will have to remove the rear drivers side one to get to the connector... Also check where the wire loom goes around the emergency brake assembly under the dash. My emergency brake ratchet plate was rubbing on my wiring. (this won't apply if you are talking about the '68) LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - Last edited by LockDoc; 12-03-2013 at 11:15 AM.