The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

72BLAZERDUDE · 12-17-2003, 04:44 PM

Anybody ever cut a hole in their frame with a hole saw. I need to cut some holes through a cross member for exhaust and thought I would try a hole saw first. I only need to cut two holes and was wondering if one one of those bi-metal ones from Lowes or Home Depot would work. Wasnt sure how hard the frame is.

12-17-2003, 04:44 PM	#1
72BLAZERDUDE Registered User Join Date: Jan 2002 Location: WATAUGA,TX Posts: 675	Cutting the Frame Anybody ever cut a hole in their frame with a hole saw. I need to cut some holes through a cross member for exhaust and thought I would try a hole saw first. I only need to cut two holes and was wondering if one one of those bi-metal ones from Lowes or Home Depot would work. Wasnt sure how hard the frame is. __________________ 72 2wd 307/AT/AC/TILT WHEEL 78 JIMMY HIGH SIERRA