[hard3]

I bought an aluminum 15 gal fuel cell tank.I ordered it online from a racecar place, but Summit sells the same tank. 20x24x10 in tall. I found that the stock S10 in tank pump fit the fill hole just right. It is just large enough diameter to fit over the fill hole. I made a hold down ring to bolt down with the 1/4 inch bolts that hold the fuel fill into the tank. The fuel pump is about 3/8 inch off the tank bottom. I had to make another fuel fill inlet,but have an external fill tube and door in the left rear fender. S10 pump has supply 3/8 line, return 5/16 line,vent 1/2 in. hose , and return from canister 1/4 in. tube.I made a gasket to seal the pump to the tank, and the hold down ring from 1/8 aluminum . I have about $150 invested total.