The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - AZ Two 1967 Dash harnesses for gauges and a/c

19Chevy67C10 · 12-26-2013, 02:33 AM

Can I get a picture of what you had to cut to remove this harness? And also is this a 67 specific harness. I will take it if it isn't sawed off at the main bulk head meaning from outside to inside. I would hate to have to pull every wire out to re-install them into another good fuse block..I guess a better way to describe is I'm looking for the inside main under dash harness not cut up or ruined on the side that goes though to the firewall. I can replace the ignition part of the harness easy enough...

Thanks and Merry Christmas.

Kev.

12-26-2013, 02:33 AM	#6
19Chevy67C10 Registered User Join Date: Sep 2011 Location: At the end of the road! Posts: 282	Re: Two 1967 Dash harnesses for gauges and a/c Can I get a picture of what you had to cut to remove this harness? And also is this a 67 specific harness. I will take it if it isn't sawed off at the main bulk head meaning from outside to inside. I would hate to have to pull every wire out to re-install them into another good fuse block..I guess a better way to describe is I'm looking for the inside main under dash harness not cut up or ruined on the side that goes though to the firewall. I can replace the ignition part of the harness easy enough... Thanks and Merry Christmas. Kev. __________________ Kev's-C-10