The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**FirstOwner69** · 12-31-2013, 01:26 AM

What you have is correct. The T-shaped grommets are actually well nuts. Put them into the holes in the core support from the engine side. They should be barely snug. Insert the screws through the regulator base and screw them into the well nuts. As you tighten them the well nuts expand.

12-31-2013, 01:26 AM	#5
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,854	Re: How to mount voltage regulator What you have is correct. The T-shaped grommets are actually well nuts. Put them into the holes in the core support from the engine side. They should be barely snug. Insert the screws through the regulator base and screw them into the well nuts. As you tighten them the well nuts expand.