The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Leverhead · 12-31-2013, 07:29 PM

Try cutting around the dynomat where the hole is about 1/2 inch or so around the hole and remove the dynomat in this area...it should be easier to push in the pins that way.

12-31-2013, 07:29 PM	#4
Leverhead Registered User Join Date: Jul 2013 Location: Phoenix, AZ Posts: 119	Re: Dynomat under firewall pad?? Try cutting around the dynomat where the hole is about 1/2 inch or so around the hole and remove the dynomat in this area...it should be easier to push in the pins that way.