The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**jaros44sr** · 01-17-2014, 01:28 PM

I used a 'D' crimp on the uninsulated part of the connecter and a 'C' crimp on the insulation part of the wire. Your sizes may vary depending on your crimper

I start with one size larger to get a pre crimp, just to make sure everything looks right

20140117_112720 by james_jaros, on Flickr

Finished up fuel pump, the wire dividers (blue and grey) can be a little fiddly ( sorry, must be to much wheeler/dealers) but, can be done without breaking

Alittle more work on the rails

Now, just to run green wire back to relay, and black to ground

20140117_115858 by james_jaros, on Flickr

01-17-2014, 01:28 PM	#2245
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,856	Re: PO has me PO'd I used a 'D' crimp on the uninsulated part of the connecter and a 'C' crimp on the insulation part of the wire. Your sizes may vary depending on your crimper I start with one size larger to get a pre crimp, just to make sure everything looks right 20140117_112720 by james_jaros, on Flickr Finished up fuel pump, the wire dividers (blue and grey) can be a little fiddly ( sorry, must be to much wheeler/dealers) but, can be done without breaking Alittle more work on the rails Now, just to run green wire back to relay, and black to ground 20140117_115858 by james_jaros, on Flickr __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim