The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Old Bleu · 02-01-2014, 12:56 PM

On my '64, that seal was attached to a metal piece with heavy staples. I will probably reattach mine with small bolts/nuts/washers. It worked fine for my radiator seals. I think some guys recreate the staples with wire if you want to be very correct. I also removed the metal piece that the seal mounts to from my fender for painting. That piece is held to the fender by 6 small metal gizmos that I don't see listed on that LMC page, but I'm sure they must sell. I ordered all my parts from Classic Truck Parts, and the snow here in GA has delayed delivery until Monday!

02-01-2014, 12:56 PM	#2
Old Bleu Registered User Join Date: Jul 2013 Location: Loganville, GA Posts: 115	Re: !964 c10 fender seal? On my '64, that seal was attached to a metal piece with heavy staples. I will probably reattach mine with small bolts/nuts/washers. It worked fine for my radiator seals. I think some guys recreate the staples with wire if you want to be very correct. I also removed the metal piece that the seal mounts to from my fender for painting. That piece is held to the fender by 6 small metal gizmos that I don't see listed on that LMC page, but I'm sure they must sell. I ordered all my parts from Classic Truck Parts, and the snow here in GA has delayed delivery until Monday!