Quote:
Originally Posted by mano
I hate to answer for Curt and his guys, but Jim ask if I could explain. The bags are in the stock location were the springs use to be, with a 2in drop block. There is a pipe notch installed. Maybe the notch is little higher then yours. His tire size is smaller also. I know that doesn't raise the rear end but it gets the truck lower to the ground. There were no pictures taken of the install. Maybe Jim can shoot you pics after its finished. It has basically the same air ride parts you have from Boris. Bags are airlift 2500s. Hope this helps
|
Helps a ton Mano, thanks. It must be his tire size that drops it a couple inches lower in the pics. Same set up as mine too, same bags,location etc. I used a 5 1/2 inch 1/4 wall pipe and have a deeper notch than a bought one but the deflated bag stops the 3rd just as it touches the bed floor. I would cut my floor and use 1 1/2 inches more of the notch, but the bags stop it from going lower. I need to come off the side of the frame or something.
Thanks