The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

neal 66 · 02-26-2014, 07:03 PM

I used the original 3speed standard trans cross member for my 700r4,i removed all the rivets, removed the two angled support brackets on either side that go to upper frame flange,moved cross member back to were it was needed and drilled two holes for bolts on either side cant remember if there was much more to it than that but you get the idea. Hope this helps. worked for me.

02-26-2014, 07:03 PM	#3
neal 66 Registered User Join Date: Jan 2014 Location: hamilton ont. canada Posts: 49	Re: 1964 c10 305 and 700r4 swap I used the original 3speed standard trans cross member for my 700r4,i removed all the rivets, removed the two angled support brackets on either side that go to upper frame flange,moved cross member back to were it was needed and drilled two holes for bolts on either side cant remember if there was much more to it than that but you get the idea. Hope this helps. worked for me.