The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Wrenchbender Ret · 03-04-2014, 05:23 PM

The early models had a nut on the front of the shaft. You remove this nut & then use a puller on the pulley hub. An impact wrench is the best way to take off the nut but you can put an allen wrench in the hole to hold the shaft.

03-04-2014, 05:23 PM	#6
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,229	Re: power steering pulley removal The early models had a nut on the front of the shaft. You remove this nut & then use a puller on the pulley hub. An impact wrench is the best way to take off the nut but you can put an allen wrench in the hole to hold the shaft.