The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Ok guys, got all the details on the 700R4!!!

Andy4639 · 03-19-2002, 12:33 PM

I have the cold air intake on it. (Home Made) for less than $75 in it all. I really injoy it because I don't have to worry about it cranking in the morning. I did the motor back in the late 80" and Street & Performance were the only company doing this at the time. I'm running a v-6 fierro computer with a specail chip, no egr valve. I do have oxgen sensor and they changed it over to a maps instead of mass air. You can check it out on my singnature page.

------------------
Andy
71's Are for ever!!! or 67,68,69,70,72 http://geocities.com/chevy71tpi/main.html

03-19-2002, 12:33 PM	#21
Andy4639 Old member Join Date: Jan 2002 Location: MURRELS INLET, S.C. U.S.A Posts: 19,972	I have the cold air intake on it. (Home Made) for less than $75 in it all. I really injoy it because I don't have to worry about it cranking in the morning. I did the motor back in the late 80" and Street & Performance were the only company doing this at the time. I'm running a v-6 fierro computer with a specail chip, no egr valve. I do have oxgen sensor and they changed it over to a maps instead of mass air. You can check it out on my singnature page. ------------------ Andy 71's Are for ever!!! or 67,68,69,70,72 http://geocities.com/chevy71tpi/main.html __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.