The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

FetchMeAPepsi · 03-09-2014, 02:13 PM

I'm not 100% positive (about anything) but from what I can tell it's just three drive shafts (shorter than yours now), a transfer case, a front axle and hubs, some new springs, and a hole in the floor, then you've got a 4wd.

If I was about to do that I'd just buy a 4x4 then get any parts I didn't like on it from my 2wd. Probably alot cheaper that way.
Let us know which way you go. Sounds like a fun project to follow.

03-09-2014, 02:13 PM	#3
FetchMeAPepsi Registered User Join Date: Apr 2011 Location: Edmond, Ks Posts: 595	Re: Adding 4wd to a 2wd 63 C10 I'm not 100% positive (about anything) but from what I can tell it's just three drive shafts (shorter than yours now), a transfer case, a front axle and hubs, some new springs, and a hole in the floor, then you've got a 4wd. If I was about to do that I'd just buy a 4x4 then get any parts I didn't like on it from my 2wd. Probably alot cheaper that way. Let us know which way you go. Sounds like a fun project to follow. __________________ Step by steps: Remove primer to reveal original paint Rebuild a carburetor See My Build - Cecilia! Some people are like slinkys. Not worth much but funny as heck when pushed down stairs.