Quote:
Originally Posted by walkerb
Good for you sticking to originality! Search the forum for threads. I've seen posts about bushing, etc....
Mine was a 3 on tree until the owner before me moved it to the floor. Keep us updated
|
thanks for the tip, the bushings in the linkage arms appear to be good, and intact with the metal sleeves.
The problem with it is that the "arm" for 2nd/3rd gear will kinda fall or stay in or near the 3rd gear position.
Pardon me for not knowing the correct terms. but on the column, the part that actually moves the linkage rods, wont engage the 1st or reverse linkage rod all the time..
I found a post somewhere on an adjustment for these and am attempting to adjust it, hoping for the best, but I see one plastic bearing cup cracked, and the bearing itself looks to be a bit worn..
bearing cup
this is the "actuator" for the lack of better terms..
and this piece here, I'm hopin' is supposed to be 3/4 cut..
