The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Motoxrrar · 03-13-2014, 04:47 PM

I am honestly not sure. Most manufactures for these sending units will give you the parameters. Like BWD they usually give you the ranges. For example I wanted to use my original gauge for water temp but I didn't want a huge erection coming from my head using those auto meter adapter. So I found a water temp sensor from an 86 Monte Carlo ss it had 1/8 NPT / 3/8 NPT something like that I forget. and I turned it down on the lathe for 12mm to fit the head.

03-13-2014, 04:47 PM	#43
Motoxrrar Registered User Join Date: Feb 2014 Location: Tennessee Posts: 282	Re: WTB Oil pressure sender adapter I am honestly not sure. Most manufactures for these sending units will give you the parameters. Like BWD they usually give you the ranges. For example I wanted to use my original gauge for water temp but I didn't want a huge erection coming from my head using those auto meter adapter. So I found a water temp sensor from an 86 Monte Carlo ss it had 1/8 NPT / 3/8 NPT something like that I forget. and I turned it down on the lathe for 12mm to fit the head.