The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

danho · 12-30-2003, 03:51 PM

First check to see if the rails are warped due to overtightening.
You can use some light weight Loc Tite on the bolts, or get some valve cover studs. Also make sure all the mating surfaces are clean.
Dan

12-30-2003, 03:51 PM	#2
danho Pesemistic Optimist Join Date: Dec 2002 Location: Prineville, Oregon Posts: 227	First check to see if the rails are warped due to overtightening. You can use some light weight Loc Tite on the bolts, or get some valve cover studs. Also make sure all the mating surfaces are clean. Dan