View Single Post
Old 03-24-2014, 01:04 PM   #18
CC69Rat
Senior Member

 
CC69Rat's Avatar
 
Join Date: Jan 2011
Location: Chattanooga TN
Posts: 6,224
Re: 20" Chrome Boss 338 wheels and tires, brand new

Measure from the inside edge of one brake backing plate to the other side. Have a buddy hold one end and from the same place one side vs. the other it should be 55.5" for the early housing. The late housing will be 57".

In comparison, most guys will run a 20x10 on the late housing with 5.5" BS. These are 20x8.5 with 5.25" BS. The wheel would be roughly 1.25" more narrow 'looking' than the 10" setup. But, being that low you kinda need a little room too.

Most of the bagged trucks will run a 20x10 with 6" BS (more under the truck) to keep it from hitting the inner wheel wells in the bed.

If you got this set, you could run the rear tires but I would go to a 255/40 up front. Just my opinion.
__________________
Chad

1967 C10 SWB - Project Savannah - 6.0/4L80 *Currently underway*
1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy
1986 Silverado Short Fleet - Scarlet *Sold*
1985 Silverado Short Fleet *Sold*
2022 Jeep Gladiator Mojave
2001 Jeep Cherokee XJ 4x4 - Lifted, Built
1992 Jeep Cherokee XJ 4x4 - Lifted
2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)
CC69Rat is offline   Reply With Quote