The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Already Gone** · 03-31-2014, 07:24 PM

This vacuum connector is from the stock factory intake off my 396. The vacuum line from this connect goes to my transmission. What I'm looking for is a connector like this with 2 ports coming off it so I can hook up my dash vacumn gauge. I was hunting around this afternoon at Napa and a couple of other places but no one has anything like this available. If anyone knows where I can get one like this with 2 ports new or used let me know. I know I can use piece of rubber with a T fitting and run both from that but I'd like to have the dual port OEM fitting. The thread is 3/8's.

03-31-2014, 07:24 PM	#1
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,162	Need some Help with Fitting This vacuum connector is from the stock factory intake off my 396. The vacuum line from this connect goes to my transmission. What I'm looking for is a connector like this with 2 ports coming off it so I can hook up my dash vacumn gauge. I was hunting around this afternoon at Napa and a couple of other places but no one has anything like this available. If anyone knows where I can get one like this with 2 ports new or used let me know. I know I can use piece of rubber with a T fitting and run both from that but I'd like to have the dual port OEM fitting. The thread is 3/8's. Attached Images __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021