|
Re: Coil relocation
A quick note on Taylor wires, if you use them (which is fine, I have some now), but they are sensitive to being pulled out by the wire. Even when grabbing by the boot, be careful that it doesn't seperate from the wire. This is an issue on some of the 9.8mm and 8.5mm wires with the silicon body. IF you pull it by the wire, it stretches and thins out, enough to slip out of the boot. Some high temp glue or silicon might help, haven't tried it.
The plug wires with the firmer rubber or reinforced silicon aren't as prone to it.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING 
|