|
Re: Gas guage only registers 1/4 full
Quote:
Originally Posted by TBONE1964
Remove the ground from the sending unit and turn the key on. The gauge should go past full about the 3 o clock position. If it does not, I would suspect the gauge is sticking and won't move past the 1/4 mark.
It seems odd to me that you changed the sending unit to correct the problem and still have the same problem. I would not bet on the float being in the wrong position. It is possible but not likely.
Let me know if you need a gauge. I have some in my inventory.
Thank you,
Tom
|
Tbone thanks for fast reply, I'll do that ground disconnect and get back.
__________________
1968 C10 a way to long restoration.
|