[T-P Auto]

I would like to use the "bear claw latch" n the power door lock system n the power window reg from the van. I just need to look into what trouble I'll have with this project. no pics

I need to cut out the floor pan for driveline clearence. still need to measure for drive line also. pic

Have made a cadrboard tunnel for the cab. Hope to get the 1" tubing cut n welded up in the next few days.

Got the bucket seat n power adjustment on the driver seat. Have the pass seat also mounted on the van seat frame. pic

Have to get the tunnel built first,then set in the foot feed pedal,then set in the brake pedal assy, then set in the steering wheel assy n make the shaft to the power steering pump. no pic yet

Will be using the tilt wheel from the Van.

Was going to try n use the 10" wheels but they will not clear the rear
wheel fenders. So looking for a different set of wheels.

Have had to really think thur almost all the fab that I"m doing. I think it thur several different tills I get a plan fixed in my head. Then I go for it.
Sometimes it works n sometimes it doesn't.

That is why it is called a project! ! !