The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 04-01-2014, 09:40 PM

I had the 6.0 installed and bought the neat scan gauge 2 to help keep a eye on things. I couldn't find any place I liked until I thought about the ash tray. I was going to mount it to the outside of it but then I thought take it out and see if it would fit in the opening. Well as you can see it fit's just right. I can even turn it up at a angle and it will stay.

04-01-2014, 09:40 PM	#1
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	New gauge I had the 6.0 installed and bought the neat scan gauge 2 to help keep a eye on things. I couldn't find any place I liked until I thought about the ash tray. I was going to mount it to the outside of it but then I thought take it out and see if it would fit in the opening. Well as you can see it fit's just right. I can even turn it up at a angle and it will stay. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.