Quote:
Originally Posted by Houston Ben
Hi all,
My foot and leg are getting tired of the pedal location of my 2011 5.3 DBW pedal. I have seen where you can use a Corvette or Monte Carlo DBW pedal but just need to switch two wires, does anyone know what I have to do to make it work?
Thanks,
Ben
|
It's pin D and F that need to be swapped at the pedal connector to use a Corvette or Monte Carlo pedal. I found a new in the box GM DBW Monte Carlo pedal on eBay for $25 when I did the swap in my '57 BelAir. The GM part number is 25830024 and it usually runs around $100. There are aftermarket OEM replacement pedals available for around $60.