The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - brake lines for mid 70's disc axle in 1965 k10

'63GENIII · 04-14-2014, 10:57 PM

I got mine from 4 wheel parts. Bought them for a 4 inch lift. Steel braided with the banjo fitting I think. The factory ones were too short also IIRC. I run a '73 3/4 ton 44 in my '63 k15

04-14-2014, 10:57 PM	#2
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: brake lines for mid 70's disc axle in 1965 k10 I got mine from 4 wheel parts. Bought them for a 4 inch lift. Steel braided with the banjo fitting I think. The factory ones were too short also IIRC. I run a '73 3/4 ton 44 in my '63 k15 __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29