|
I wouldn't do it with out a manual, there are some steps where you have to seat the crush sleeve and then set the pinion yoke nut and check it with an in lb. torque wrench by turning the yoke and getting a certain torque value. So a good manual would be good to have.
__________________
PR Too many projects, not enough time!
72SWB 350/350TH, 3500stall,525 lift cam 3:73 posi. Sold!
69LWB Flatbed 350/Super T-10, ported/polished 481 heads, 480 lift cam.
78SWB 468/400TH, ported/polished Alum. heads, 3:42 posi, 3000 stall on 17x8 and 18x9.5's
77 Jeep CJ-5 304V8 fiberglass body on 36" Ground Hawgs
|