[thefraze_1020]

If you have any rust that you need to deal with. I highly recommend that you do what I did for my floor. Put a wire brush head on a drill and clean up the floor. Then vacuum the debris out. For the rust, I used a product called Conquest. Not sure where you'd find it around there, because I bought mine from a boatyard. Conquest is really expensive, but you shouldn't need much. Pour it into a pint bucket, yogurt container, etc. Mix it up and apply with a paintbrush to the rust. When it's converting the rust, it should turn the rust black. Allow at least a day for it to dry. Then you can prepare to paint the floor.