The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

72CampSpecial · 04-28-2014, 02:06 PM

71 Dually-- Im going to pull the other one apart since it only has the Bearing race installed currently and re-verify everything (Size/shape/height).. Ive checked them once..but something isnt right.

The other bearing seal was installed and removed and ther is evidence that its bottoming out against the new race..im perplexed why these dont drop right in since they are they same height as the original..

Ill also ck to makse sure im getting the new race all the way down (best i can tell it is)

04-28-2014, 02:06 PM	#7
72CampSpecial Registered User Join Date: Nov 2012 Location: Tacoma, WA Posts: 133	Re: wheel bearing Grease Seal: Flush or not? 71 Dually-- Im going to pull the other one apart since it only has the Bearing race installed currently and re-verify everything (Size/shape/height).. Ive checked them once..but something isnt right. The other bearing seal was installed and removed and ther is evidence that its bottoming out against the new race..im perplexed why these dont drop right in since they are they same height as the original.. Ill also ck to makse sure im getting the new race all the way down (best i can tell it is)