well the parts list goes a little something like this,
- ridetech upper and lower control arms
front
-cpp modular 2.5 inch drop spindles with brake mounts
-cpp drilled and slotted rotors
- wilwood d52 calipers with sport pads
- porterbuilt stage 1 front kit
-15 inch vintique wheels with bare centers 6 lug
-jegs 1/4 inch wheel spacers
-napa alignment shims
-long acre alignment tool
-accuair e-level
-dual 480c vair compressors
- chrome 5 gallon tank
rear
-dominator 2500 bags
-my own bag plates
-my own 2 inch drop blocks
-my own long panhard bar going from stock frame mount to opposing drop block
-my own 3 inch c-notch
-lengthened u-bolts from a local shop
if your just starting out you might have a hard time coming up with the money to do all of this so build what you can if you are able to and can do quality work. dont risk the health of others by throwing something together just to save a buck. and i highly recommend ridetech products they might seem a little spendy but they come powdercoated. porterbuilt is also excellent but remember you have to do the finish on those parts which can add up quick. there are tons of threads on building your own parts and modifying your control arms and crossmember. do a bunch of research and know what your getting into. if it seems daunting then work on other parts of the truck until you are confident in your knowledge and work. heres the rear of mine so you can see what i built as well as how low it got using just ridetech lowers with all stock suspension.
